Advanced Materials
h-BN, electrolyte salts · 24 items · independent inventory.
R&DPre-baked Anode, Research / Laboratory Grade
Bench-scale anode (1000 × 500 × 400 mm) at ≥ 99.5% purity for aluminium-electrolysis R&D, novel-cell trials and university research. Each block ships with full chemical / electrical / mechanical CoA.
Pre-baked Anode, High Compressive Strength
Toughened anode with compressive strength ≥ 42 MPa for heavy-service cells subject to frequent changeouts. Built from high-strength calcined coke + high-binder pitch.
Pre-baked Anode, Low Volatile
Low-volatile-organic anode (volatile content ≤ 0.5%) with stable bake-out. Designed for smelters operating under tight regional emission caps.
BespokePre-baked Anode, Custom Dimensions
Made-to-order anodes for non-standard cell geometries. Dimensions configurable 1500–1700 × 600–750 × 500–600 mm. MOQ 50 t; tooling lead time 14 days.
Pre-baked Anode, Lightweight (-5%)
Mass-reduced anode (-5% on a 1550×660×520 mm block) with strength retained. Cuts logistics cost per ton and reduces handling load on automated anode-changeout systems.
Food-contactPre-baked Anode, Food-Grade Aluminium Service
Ultra-low-impurity anode for aluminium feedstock used in food-contact products. Heavy metals ≤ 50 ppm, sulphur ≤ 0.7%, food-contact-grade coke + high-purity pitch.
GreenPre-baked Anode, Low-Emission (Waste-Heat Compatible)
Energy-saving anode formulated for low-temperature baking and compatibility with waste-heat-recovery furnaces. Designed for green / low-carbon smelter operations.
Pre-baked Anode, Alkali-Resistant
Specialty anode for electrolyte chemistries with elevated alkali ratios. Butt-end recovery rate ≥ 85% over a full cycle. Built around alkali-resistant coke + corrosion-resistant pitch.
Top conductivityPre-baked Anode, Graphitised (High Conductivity)
Partially-graphitised anode (graphitisation degree ≥ 25%) with resistivity ≤ 45 µΩ·m. Engineered for the highest-current-density cells where every µΩ of resistance translates directly into kWh saved per ton of aluminium.
CircularPre-baked Anode, 20% Recycled Blend
Circular-economy anode containing 20% spent-anode recycle without performance compromise. Built for smelters operating under closed-loop sustainability programmes or cost-reduction mandates.
Pre-baked Anode, Engineered Micro-Crack
Controlled-microcrack-structure anode with superior thermal-shock tolerance for severe-service cells. The engineered fracture network absorbs thermal stress before it propagates into the body.
CoatedPre-baked Anode, Anti-Oxidation Coated
Surface-coated anode with CO₂ reactivity ≥ 88%. The protective layer reduces airburn losses, dust generation and cell maintenance frequency.
High purityPre-baked Anode, Low Ash
High-purity anode for electronic-grade and battery-grade aluminium production. Ash ≤ 0.3%, total metals ≤ 100 ppm. Built from high-purity coke + ash-free pitch.
Mega-cellPre-baked Anode, Ultra-Large-Cell Format
Oversized anode (1650 × 700 × 580 mm) designed for 500–600 kA mega-cells used by integrated aluminium majors. Premium-grade coke + high-strength pitch for the highest current densities in commercial operation.
Pre-baked Anode, Small-Cell Format
Compact-format anode (1400 × 600 × 500 mm) sized for 100–160 kA cells used by smaller regional smelters and secondary-aluminium producers.
Export readyPre-baked Anode, FAO Export Grade
Anode compliant with FAO international export standard. Sulphur ≤ 1.2%, environmentally-controlled pitch. Documentation pack includes Certificate of Analysis, Certificate of Origin and REACH/export-ready paperwork.
Cold climatePre-baked Anode, High Thermal-Shock Resistance
Thermal-cycling-resistant anode with CTE ≤ 5.5×10⁻⁶ /℃. Built for cells that see frequent stops/starts or cold winter operation. Reduces edge cracking and surface spalling.
Energy savePre-baked Anode, Low Resistivity
Energy-saving anode for ultra-large cells. Specific resistivity ≤ 48 µΩ·m via highly graphitised coke and conductive-modified pitch. Cuts cell voltage drop and improves current efficiency.
Long lifePre-baked Anode, High Density
Densified anode for long-service-life cells. Real density ≥ 2.06 g/cm³, apparent density ≥ 1.62 g/cm³. Higher density means longer anode life, lower net carbon consumption, and fewer change-outs per cell campaign.
Low emissionPre-baked Anode, Ultra-Low Sulphur
Anode for high-purity aluminium production. Sulphur ≤ 0.8%, ash ≤ 0.4%. Built from low-sulphur calcined coke and matched low-S pitch to keep SO₂ emissions in the cell line down and impurity pickup in molten Al minimal.
Top sellerPre-baked Anode TY-2 (High Performance)
Higher-grade anode for medium-to-large smelting cells. Resistivity ≤ 52 µΩ·m, compressive strength ≥ 38 MPa, sulphur ≤ 1.5%. Premium calcined coke + modified pitch binder for tighter porosity and lower carbon consumption.
WorkhorsePre-baked Anode TY-1 (Standard)
General-purpose pre-baked carbon anode for aluminium electrolysis cells in the 160–300 kA range. Specific resistivity ≤ 55 µΩ·m, ash ≤ 0.5%, sulphur ≤ 1.8%. Built from calcined petroleum coke and medium-temperature coal-tar pitch.
Ultra purePhotoinitiator 369, Electronic Grade (Ultra Pure)
Ultra-pure 369 with metal-ion content ≤10 ppb. For semiconductor packaging, fine-line PCB and LCD photoresist formulations.
Ultra pureClass 81,2-Propanediamine, Electronic Grade (Ultra Pure)
Ultra-pure electronic grade, ≥99.9% purity, metal ions ≤10 ppb. For semiconductor cleaning fluids, electronic chip fabrication and precision electronic chemicals.