Catalogue Solvents Reagents Materials

Catalogue Documents Contact WhatsApp

Chem-End supplies analytical reagents, advanced materials and lab consumables to research and industry. Browse product specifications and available documents, or contact our team about your requirements.

Catalogue

All products
Solvents
Reagents
Catalysts
Advanced Materials

Compliance & support

Certificate of Analysis
Safety Data Sheets
Shipping & DG handling
Returns
Contact sales

© 2026 RLG Global Pte. Ltd. All rights reserved.

190 Woodlands Industrial Park E5, #10-06, Woodlands BizHub · Singapore 757516

Chemical catalogue

Find a product by name, CAS number or SKU, then compare its specifications.

Search

CategoryGradePurchase optionSort

56 products · Page 2 of 3

Product photo to be confirmed

materials · 0.6mm，HRC40-45

Low Carbon Cast Steel Shot S230

Low Carbon Cast Steel Shot S230 for general iron castings, forgings, steel-structure sand removal, oxide-scale removal applications. Specification: 0.6mm, HRC40-45. Material: Low-carbon steel, atomized and quenched.

From$510.56 / ton1 option

Product photo to be confirmed

Abrasive

materials · 0.8mm，HRC40-45

Low Carbon Cast Steel Shot S280

Low Carbon Cast Steel Shot S280 for general casting parts, automotive chassis parts, container shot blasting and cleaning applications. Specification: 0.8mm, HRC40-45. Material: Low-carbon steel, atomized and quenched.

From$510.56 / ton1 option

Product photo to be confirmed

materials · 1.0mm，HRC40-45

Low Carbon Cast Steel Shot S330

Low Carbon Cast Steel Shot S330 for large iron castings, heavy-machinery castings, bridge steel-structure pretreatment applications. Specification: 1.0mm, HRC40-45. Material: Low-carbon steel, atomized and quenched.

From$510.56 / ton1 option

Product photo to be confirmed

materials · 1.2mm，HRC55-60

Low-Bainite Reinforced Steel Shot S390

Low-Bainite Reinforced Steel Shot S390 for high-strength gears, crankshafts, wind-power components, aerospace-part surface peening applications. Specification: 1.2mm, HRC55-60. Material: Bainitic steel, austempered.

From$545.77 / ton1 option

Product photo to be confirmed

materials · 0.6mm，HRC35-40

Low-Hardness Steel Shot for Aluminum Castings S230

Low-Hardness Steel Shot for Aluminum Castings S230 for aluminum-alloy castings, magnesium-alloy parts, sand removal for thin-wall parts, anti-deformation processing applications. Specification: 0.6mm, HRC35-40. Material: Ultra-low-carbon steel, soft quenched.

From$545.77 / ton1 option

Maleic Anhydride

Maleic Anhydride

Maleic anhydride is mainly used to produce unsaturated polyester resin, succinic acid, fumaric acid, tetrahydrophthalic anhydride and other important organic and fine chemicals. It is widely used in synthetic resins, coatings, pesticides, lubricant additives, pharmaceuticals, paper-treatment agents, food additives and stabilizers.

Purchase optionRequest quote1 option

Oilfield Biocide

materials · Oilfield chemical additive

Oilfield Biocide

Oilfield Biocide supplied by Xingyou New Materials Technology (Shandong) Co., Ltd. for oilfield production, crude-oil treatment and process-chemical workflows. Source quote: RMB 4000/ton.

From$563.38 / ton1 option

Oilfield Desulfurization Agent

materials · Oilfield chemical additive

Oilfield Desulfurization Agent

Oilfield Desulfurization Agent supplied by Xingyou New Materials Technology (Shandong) Co., Ltd. for oilfield production, crude-oil treatment and process-chemical workflows. Source quote: RMB 4000/ton.

From$563.38 / ton1 option

Product photo to be confirmed

materials · Electronic · UP (≤10 ppb metals)

Photoinitiator 369, Electronic Grade (Ultra Pure)

CAS 119313-12-1C₂₃H₃₀N₂O₂

Ultra-pure 369 with metal-ion content ≤10 ppb. For semiconductor packaging, fine-line PCB and LCD photoresist formulations.

From$26,060.00 / ton1 option

Pour Point Depressant

materials · Oilfield chemical additive

Pour Point Depressant

Pour Point Depressant supplied by Xingyou New Materials Technology (Shandong) Co., Ltd. for oilfield production, crude-oil treatment and process-chemical workflows. Source quote: RMB 5000/ton.

From$704.23 / ton1 option

Product photo to be confirmed

materials · Standard · TY-1

Pre-baked Anode TY-1 (Standard)

General-purpose pre-baked carbon anode for aluminium electrolysis cells in the 160–300 kA range. Specific resistivity ≤ 55 µΩ·m, ash ≤ 0.5%, sulphur ≤ 1.8%. Built from calcined petroleum coke and medium-temperature coal-tar pitch.

From$740.00 / ton1 option

Product photo to be confirmed

materials · High Performance · TY-2

Pre-baked Anode TY-2 (High Performance)

Higher-grade anode for medium-to-large smelting cells. Resistivity ≤ 52 µΩ·m, compressive strength ≥ 38 MPa, sulphur ≤ 1.5%. Premium calcined coke + modified pitch binder for tighter porosity and lower carbon consumption.

From$780.00 / ton1 option

Product photo to be confirmed

materials · Recycled 20%

Pre-baked Anode, 20% Recycled Blend

Circular-economy anode containing 20% spent-anode recycle without performance compromise. Built for smelters operating under closed-loop sustainability programmes or cost-reduction mandates.

From$710.00 / ton1 option

Product photo to be confirmed

materials · Alkali-Resistant

Pre-baked Anode, Alkali-Resistant

Specialty anode for electrolyte chemistries with elevated alkali ratios. Butt-end recovery rate ≥ 85% over a full cycle. Built around alkali-resistant coke + corrosion-resistant pitch.

From$810.00 / ton1 option

Product photo to be confirmed

materials · Anti-Oxidation Coated

Pre-baked Anode, Anti-Oxidation Coated

Surface-coated anode with CO₂ reactivity ≥ 88%. The protective layer reduces airburn losses, dust generation and cell maintenance frequency.

From$830.00 / ton1 option

Product photo to be confirmed

materials · Custom · Made-to-Order

Pre-baked Anode, Custom Dimensions

Made-to-order anodes for non-standard cell geometries. Dimensions configurable 1500–1700 × 600–750 × 500–600 mm. MOQ 50 t; tooling lead time 14 days.

From$810.00 / ton1 option

Product photo to be confirmed

materials · Engineered Micro-Crack

Pre-baked Anode, Engineered Micro-Crack

Controlled-microcrack-structure anode with superior thermal-shock tolerance for severe-service cells. The engineered fracture network absorbs thermal stress before it propagates into the body.

From$820.00 / ton1 option

Product photo to be confirmed

materials · Export · FAO

Pre-baked Anode, FAO Export Grade

Anode compliant with FAO international export standard. Sulphur ≤ 1.2%, environmentally-controlled pitch. Documentation pack includes Certificate of Analysis, Certificate of Origin and REACH/export-ready paperwork.

From$800.00 / ton1 option

Product photo to be confirmed

materials · Food-Contact Aluminium

Pre-baked Anode, Food-Grade Aluminium Service

Ultra-low-impurity anode for aluminium feedstock used in food-contact products. Heavy metals ≤ 50 ppm, sulphur ≤ 0.7%, food-contact-grade coke + high-purity pitch.

From$900.00 / ton1 option

Product photo to be confirmed

Top conductivity

materials · Graphitised · Ultra-Conductive

Pre-baked Anode, Graphitised (High Conductivity)

Partially-graphitised anode (graphitisation degree ≥ 25%) with resistivity ≤ 45 µΩ·m. Engineered for the highest-current-density cells where every µΩ of resistance translates directly into kWh saved per ton of aluminium.

From$900.00 / ton1 option

Product photo to be confirmed

materials · High Compressive

Pre-baked Anode, High Compressive Strength

Toughened anode with compressive strength ≥ 42 MPa for heavy-service cells subject to frequent changeouts. Built from high-strength calcined coke + high-binder pitch.

From$830.00 / ton1 option

Product photo to be confirmed

materials · High Density

Pre-baked Anode, High Density

Densified anode for long-service-life cells. Real density ≥ 2.06 g/cm³, apparent density ≥ 1.62 g/cm³. Higher density means longer anode life, lower net carbon consumption, and fewer change-outs per cell campaign.

From$820.00 / ton1 option

Product photo to be confirmed

materials · Heat-Shock Stable

Pre-baked Anode, High Thermal-Shock Resistance

Thermal-cycling-resistant anode with CTE ≤ 5.5×10⁻⁶ /℃. Built for cells that see frequent stops/starts or cold winter operation. Reduces edge cracking and surface spalling.

From$810.00 / ton1 option

Product photo to be confirmed

materials · Lightweight · Strength-Retained

Pre-baked Anode, Lightweight (-5%)

Mass-reduced anode (-5% on a 1550×660×520 mm block) with strength retained. Cuts logistics cost per ton and reduces handling load on automated anode-changeout systems.

From$770.00 / ton1 option

← Previous2 / 3Next →